Other
Other sender, sensors, switches
240-099s - VDO Gauge Mounting Cup Kit
VDO Gauge Mounting Cup Kit
- Inside Diameter: 2 1⁄16" (52mm)
- Included: Mounting hardware
340-001 - VDO Sender Generator for Speedometer Tachometer
VDO Generator Sender
- Application: VDO Speedometers & Tachometers without Odometer
- Thread: 7⁄8" - 18 NPT
- 4 Pulses per Revolution
- Drive Key: Required
340-002 - VDO Sender Generator for Speedometer Tachometer
VDO Generator Sender
- For Speedometer & Tachometer without Odometer
- Thread: M22 x 1.5
- Electrical connection: 2-pole or 3-pole, Insulated Return
- Driving torque: 500 pcm max.
- Rotational speed: 3000 min-1 max.
- No-load voltage: 19.3 V at 2000 min-1
- Voltage tolerance: ±1 % at nominal value at +20° C
- Operating temperature: -25° C to +90° C
340-007 - VDO Sender Generator for Speedometer Tachometer
VDO 4 Pulse Generator Sender
340-008 - VDO Sender Generator for Speedometer Tachometer
VDO Sender, Generator, for Speedometer & Tachometer with Odometer, 7/8 - 18 NPT
340-011 - VDO Sender GM Electronic Programmable Speedometers
VDO Speedometer RPM Sensor / Sender
- Application: GM & Chrysler (with threaded transmission sender)
- For Electronic, Programmable Speedometers
- Voltage: 12V
- Connection: Unterminated Wire Lead
- Thread Size: 7⁄8" - 18 NPT
- Number of Pulses: 16 Pulses per Revolution (PPR)
- Aluminum body
- Standard Hall Effect
340-013 - VDO Hall Effect Sender Ford Transmission
VDO Ford Speedometer Sender
- Application: Electronic, programmable speedometers
- Type: Hall Effect
- Pulses: 16
- Designed for most Ford transmissions with plug-in style speedometer cable output. Not designed for O.E.M. speedometers.
- Connection: Unterminated Wire Lead
340-014 - VDO Sender Ford Electronic Programmable Speedometers
VDO Speedometer Sender
- Application: For Ford Electronic, Programmable Speedometers
- Plug-in
- Through Drive (for Cruise Control)
- Hall Effect with 16 Pulse
- Thread: 7⁄8" - 18 NPT
340-020 - VDO Sender Inductive-Programmable Speedometers-Tachometers
VDO Sender
- Applications: For VDO Electronic and Programmable Speedometers and Tachometers
- Magnetic Pick-up
- Length: 2 inches
- Thread: 3/4" - 16
340-216-005-001C - VDO GENERATOR SENDER BLOCKING OSCILLATOR
VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 90MM LONG, 8-15V, M18X1.5
Special Order- requires additional lead time
340-216-005-002C - VDO GENERATOR SENDER BLOCKING OSCILLATOR
VDO Tachometer/Speedometer Sender
- Sender type: Blocking Oscillator - 400Hz
- Length: 63mm
- Thread: M18 x 1.5 Male
- Power supply: 8 - 15V Stabilized
- Sensor signal: 2-pole insulated return
- Connector: Bayonet 4-pole 2.8mm
- For use with VDO speedometers and tachometers designated as generator-type (4 pulses per revolution)
340-216-010-003C - VDO GENERATOR SENDER BLOCKING OSCILLATOR
VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 25MM LONG, 8-15V, M18X1.5
Special Order- requires additional lead time
340-216-010-004C - VDO GENERATOR SENDER BLOCKING OSCILLATOR
VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 90MM LONG, 5-30V, M18X1.5
Special Order- requires additional lead time
340-786 - VDO GPS speedometer Sender
VDO GPS Speed Sender
- Adds GPS Accuracy to VDO Electronic Speedometers
- Green, Orange, Red status LED
- 6ft (2m) shielded cable (unterminated)
- Compatible with all current and previous VDO electronic speedometers, as well as some non-VDO speedometers
- Low current draw, less than 10mA (at 12 volts)
- Voltage: 12V
Click Here for installation instructions
340-804-005-001C - VDO Inductive Tachometer - Speedometer Sender
VDO Inductive Tachometer / Speedometer Sender
- Sender type: Inductive - 250Hz
- Thread: M18 x 1.5
- Resistance: 1.050 ± 100 Ohm
- Sensor signal: 2-pole insulated return
- Connector: Kostal 2-pole pin 4mm
When NOT in stock, our normal lead time is 4 - 6 weeks
340-804-005-013A - VDO Inductive Sender Kostal Connector
VDO Inductive Sender
- Sender type: Inductive - 250Hz
- Application: Tachometer - Speedometer
- Thread: M18 x 1.5
- Length: 71.4mm
- Resistance: 100Ω ± 1.050
- Sensor signal: 2-pole insulated return
- Connector: Kostal 2-pole pin 4mm
340-804-007-002A - VDO INDUCTIVE SENDER 28.5MM LONG SPADE CONNECTOR
VDO Inductive Sender
- Sender type: Inductive - 250Hz
- Application: For inductive and programmable speedometers and tachometers
- Length: 28.5mm
- Thread: M18 x 1.5
- Resistance: 1.050 ± 100 Ohm
- Sensor signal: 2-pole insulated return
- Connector: 2 Spades 6.3 x 0.8mm
340-804-007-003C - VDO INDUCTIVE SENDER 34MM LONG SPADE CONNECTOR
VDO Tachometer/Speedometer Sender
- Sender type: Inductive - 250Hz
- Thread: M18 x 1.5
- Length: 34mm
- Resistance: 1.050 ± 100Ω
- Sensor signal: 2-pole insulated return
- Connector: 2 Spades 6.3x0.8mm
- For inductive and programmable speedometers and tachometers
340-804-007-004C - VDO INDUCTIVE SENDER 34MM LONG SPADE CONNECTOR
VDO Inductive Sender
- Sender type: Inductive - 250Hz
- Thread: 3⁄4" -16 UNF-2A
- Resistance: 1.050Ω ± 100Ω
- Sensor signal: 2-pole insulated return
- Length: 34mm (1 1⁄3")
- Connector: 2x Spades (6.3 x 0.8mm)
340-804-007-011C - VDO INDUCTIVE SENDER 34MM LONG SPADE CONNECTOR
VDO Inductive Sender
- Sender type: Inductive - 250Hz
- Length: 34mm
- Thread: M18 x 1.5
- Resistance: 1.050 ± 100 Ohm
- Sensor signal: 2-pole insulated return
- Connector: (2) Blades 6.3 x 0.8mm
VDO Fuel Level Sender
- Tank Depth: 6" - 24"
- Ohm Range: 180Ω - 0Ω